PCB Dust Removal Sticky Silicone Roller Brush Manual Cleaner Phone Screen Anti-Static Roller Repair Tool Aluminum Alloy Handle
******IMPORTANT******
Silicone roller
Usage:
1. Correct usage method: When using silicone wheels, please use a backward rolling method. This can extend the service life of the silicone adhesive, especially for cleaning products with uneven surfaces, such as PCB boards, and can make the bracket less prone to deformation and prevent screws from loosening.
2. Cleaning silicone adhesive: Please wipe with anhydrous alcohol, wipe dry, or blow dry with an air gun.
3. When using, do not come into contact with benzene and ester solvents (such as Tena water, mesh washing water, phenanthroline water, ethyl acetate, etc.). Once in contact, immediately wipe with anhydrous alcohol and blow dry with an air gun.
4. After using it for about 5000 times, if the viscosity significantly decreases, please note that this phenomenon is caused by contamination of the rubber wheel. The following measures should be taken: clean it with anhydrous alcohol in a timely manner, place it in an oven, bake at 50 ℃ for 30 minutes, and the viscosity will increase. Using this method, the service life of our silicone rubber wheel is over 60000 times. If conditions are not met, clean it with alcohol, wrap it in clean packaging film, and leave it for 48 hours, The viscosity has also rebounded.
B: Precautions:
1. It is strictly prohibited to use benzene or ester solvents (such as Tena water, mesh washing water, phenanthroline water, ethyl acetate, etc.) to clean the silicone adhesive. These solvents will cause the silicone adhesive to expand, age, deform, and reduce viscosity quickly.
2. Please do not use silicone wheels to clean the ground, walls, or rough board surfaces: this can easily scratch the silicone.
3. Please do not scratch the silicone adhesive with a sharp blade.
C: Maintenance and storage:
After use: Please use a silicone wheel to roll back and forth several times on the sticky paper to keep the silicone wheel clean. Storage: Please keep away from benzene solvents, inks, and curing agents, and place them in clean packaging. When not in use: Please avoid high temperature environments and direct sunlight.
D、 Special considerations (for PCB users):
1. It is recommended to use metal frame products for green oil, burst light, and inner layer processes.
2. During the use of green oil, text printing, etc., special attention should be paid to not being contaminated by organic solvents.
3. Be careful not to contaminate the green oil and explosion processes with substances containing release agents. This pollution can cause a rapid decrease or disappearance of silicone adhesive viscosity. It is recommended to wipe with anhydrous essence after every 1000 or daily use to remove the release agent and maintain product viscosity.
***SHIPPING & DELIVERY***
Product Size |
4 inch, 6 inch, 8 inch, 10 inch, 12 inch, 14 inch, 16 inch, 18 inch, 20 inch |
---|